Efficiency Mode, 97% Feature, Heavy Duty Backwash - North Star NSC30UD1 Installation Operation & Maintenance

Ultra II
DEMAND TIMER FEATURES, SETTINGS, AND SERVICE, continued
RECHARGE NOW
RECHARGE TONIGHT
VACATION NOTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Ultra II Demand water softener regenerates only while water is used and softening capacity must be re-
stored. For this reason, the softener will not regenerate when you are away from home for extended periods.
feature: PROGRAM MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If electrical power to the softener is interrupted, the
time display is blank, but the timer keeps correct
time for about 24 hours. When power is restored,
you have to reset the present time only if the display
is flashing. All other settings are maintained and
never require resetting unless a change is desired.
setting: REGENERATION (STARTING) TIME, MAXIMUM DAYS BETWEEN REGENERATIONS,
EFFICIENCY MODE, HEAVY DUTY BACKWASH AND 97% FEATURE . . . . . . . . . . . . . . . . . . . . . .
NOTE: Each of these settings has a factory set default value. The defaults are: Regeneration start time --
2:00AM; Maximum days between regenerations -- 0 (display shows dY - -); Efficiency Mode -- OFF; 97% Fea-
ture -- OFF; Heavy duty backwash -- OFF. The defaults suit most installations. However, depending on water
supply quality, household peak water use hours, etc., adjustment is available to meet specific needs. To make
a change, read and do the following.
Press and hold in the RECHARGE button until RE-
CHARGE NOW starts to flash in the time display
area. The softener begins an immediate regenera-
tion, and when over in about two hours, you will have
a new supply of soft water. Once started, you cannot
cancel this regeneration.
Touch (do not hold) the RECHARGE button, and
RECHARGE TONIGHT flashes in the time display
area. A regeneration will occur at the next preset re-
generation start time. If you decide to cancel this re-
generation, before it has started, touch the same
button once more.
If the time is flashing after a long power outage, the
softener continues to work as it should to provide
you with soft water. However, regenerations may oc-
cur at the wrong time of day until you reset the timer
to the correct time of day, page 11.
continued
19