Function Code A: Clear Error Code Log
Function Code
1. Place the drive in maintenance mode. For instructions, see "Entering
2. Press the Unload Button once per second until
3. Press and hold the Unload Button for three or more seconds, then release it to
Function Code C: Insert Cartridge into Tape Drive
This function cannot be selected by itself, but is part of other maintenance
functions (such as Run Tape Drive Diagnostics and Create FMR Tape) that require
a tape cartridge to be inserted.
76
IBM TotalStorage 3580 Tape Drive Setup, Operator, and Service Guide
A
erases the contents of the error code log.
Maintenance Mode" on page 68.
cycle past the desired code, press the Unload Button once per second until the
code reappears.)
A
select the function.
erases all errors from the error code log. The tape drive exits maintenance
mode.
flashes in the SCD, followed by
A
appears in the SCD. (If you
0
. The tape drive