Volume; Reject Volume - Whites MXSPORT User Manual

Disc Tips: In the DISC menu option, if the zone selection cursor
is left under a particular zone for a couple seconds, the text will
change from DISC to a short descriptor of what kind of targets
one might find in that zone, (e.g. GOLD, QUARTR, etc.)
In the DISC menu option, all zones to the left of the zone selection
cursor can be discriminated, and all others accepted, by holding
the pinpoint button for a short time. The disc mask can be quickly
cleared by placing the cursor on the lowest zone, and holding the
pinpoint button.

Volume

Volume adjusts how loudly a metal target beeps. The MX Sport
provides adequate volume levels for individuals with good hearing.
Those with impaired hearing should use headphones.
To Adjust Volume:
1. Press Options and use the up & down arrows to select Vol-
ume.
2. Press + & - buttons to select the desired volume level.
3. Press Options to exit, or wait 10–15 seconds for the options
mode to automatically time out.
Reject Volume (REJ VOL)
Discrimination normally suppress the audio sound (beep) of metal
targets that are selected for rejection. Although some rejected targets
produce some broken audio sounds, as much audio is suppressed as is
possible.
REJ VOL (Rejection Volume) allows a user to change from suppressing
the audio (beep) to assigning the rejected targets a volume level (beep)
lower than that of the accepted targets. Searching in this way allows
one to hear and immediately recognize the rejected targets and thus
slow down and check for possible good targets nearby.
0 = Normal Discrimination Audio. Rejected target audio is suppressed.
10= Audio volume of rejected targets is 10% that of accepted targets.
20 = The audio volume of rejected targets is 20% that of accepted targets.
20