Charmglow 6320 Owner's Manual page 26

25
Heat Shield Plate
Step 8
Attach heat shield plate to back
panel using three #8 self-tapping
screws.
NOTE: When performing Step 9,
Grill Body
Assembly
Step 9
With the help of a friend, place grill
body assembly on cart frame. Grill
body will rest on angled base of
vertical supports. Align bolt holes
located on the outside of the grill
body assembly. Secure using four
M6 X12mm bolts (black) with star
washers (black).
Lift grill body from front and
rear panels to avoid injury
to hands and fingers.