Basic Service; Technical Data - PROEL PLLEDMLW User Manual

Moving head led wash

Hide thumbs Also See for PLLEDMLW:

Table of Contents

Available languages

BASIC SERVICE

Regular cleaning of the elements in the optical path, as well as the air vents, is vital to maintaining the

operational quality of the PLLEDMLW.

Important! Excessive dust, smoke fluid, and particulate build-up degrades performance and causes

overheating and damage to the fixture that is not covered by the warranty.

Cleaning the air vents:

To maintain adequate cooling, dust must be cleaned from the air vents periodically. Remove dust from

the air vents with a soft brush, cotton swab, vacuum, or compressed air.

Cleaning optical components:

Clean the optical components regularly. The presence of smudges or dust on optical surfaces can

reduce the strength of the light output and the quality of the effects.

Use care when cleaning optical components and work in a clean, well lit area. The coated surfaces are

fragile and easily scratched. Do not use solvents that can damage plastic or painted surfaces.

Disconnect the fixture from power and allow it to.

Remove upper cover.

Vacuum or gently blow away dust and loose particles with compressed air.

Remove stuck particles with an unscented tissue or cotton swab moistened with glass cleaner or

distilled water. Do not rub the surface: lift the particles off with a soft repeated press.

Remove smoke, and other, residues with cotton swabs or unscented tissues moistened with

isopropyl alcohol. A commercial glass cleaner may be used, but residues must be removed with

distilled water. Clean with a slow circular motion from center to edge. Dry with a clean, soft and lint-

free cloth or compressed air.

Close the fixture cover and tighten the thumb screw, taking care not to trap any loose wires.

PLLEDMLW

Power supply:

230V 50Hz - 120V 60Hz

Consumption:

Led:

1 RGB full color 15W

Dimensions:

LxWxH mm.177x177x250

Weight:

kg. 4,5

Table of Contents