Jenn-Air CCGP2420P User Manual page 9

Care and Clean
• $ • $ • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Cleaning Chart -- continued
Parts Cleaning Procedure
Surface • Light Soil Wash them in hot. soapy water, rinse and dry.
Burner Grates
• Moderate Soil Clean with a soap-filled, nonabrasive, plastic pad or Cooktop
Cleaning Creme* (Part # 20000001) and a sponge. If soil remains, reapply Cookto
Creme. Cover with a damp paper towel and soak for 30 minutes. Scrub again, rms_
• Burned on Soil Remove grates, place on newspapers and carefully spray with c
oven cleaner. (Do not spray surrounding surfaces. Place in plastic bags for several
or overmght. Wearing rubber gloves, remove from bags. Wash. rinse, dry and replace
• The grates are made of porcelain on cast iron and are very durable, however, they
gradually discolor. This is due to exposure to high temperatures from the gas flam
• • • • . • • • • , • • • • • • • • • , • • , • • • • • • • • • • • • • . , m • • • • • • • • • • • • • , • • • •
Surface • The surface burner heads are removable.
BURNER HEAD
Burner Heads The cap portion of the head is porcelain
and the port area is aluminum. Wash Cat __i_lil:_
the burner heads in the sink with mild
detergent and a plastic scrubber.
• Check to be sure all ports are open. To
/
open clogged ports, insert a straight pin
wroth
P,ns
J_
directly into each port, Do not enlarge or
distort the port.
• When replacing the burner heads, carefully
align the tab on the burner base with the
indentation m the head. The two pins will
fit in the slots when the tab is aligned with
the indentation.
NOTE: When burner heads are removed for
BURNER B ASE
cleaning, do not spill liquids through the holes in
the burner base.
• Brand names are trademarks of the respective manufacturers.