Blue Screen; Auto Power On; Factory Reset - Haier HLC15E-D Service Manual

Hide thumbs Also See for HLC15E-D:

Table of Contents

9.10 Blue Screen

This selection is to choose when there is no input signal the LCD TV would display blue screen or not.

The option could be used to select When the power, the LCD TV will work at once or not. The default

setting is Always Off.

9.12 Backlight

This option can adjust the luminance of backlight by increase or decrease the valu. The default valu is

80.

9.13 Export Setting

It was used to educe the setting values to another LCD TV.

9.14 Import Setting

It was used to receive the setting values from another LCD TV. If we want to make two TVS have the

same setting values. We can use the option.

This selection is to retrieve the original factory default setting. It was used to renew the register after

upgrade the software. After this option, we must do the option of Auto Color in 1024*768/60HZ, YpbPr,

480i/60HZ,1080i/60HZ to revise the color.

9.16 Burning in

This is for fadtory run-in testing. The screen would display red, green, blue and black screen repeatedly.

Each color screen could be exam at that time.

Table of Contents

Hl15e-d