Table of Contents
Advertisement
[4:3 LETTER BOX]
[4:3 PAN SCAN]
[16:9]
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x [HDMI RESOLUTION]
Selects the type of video signals output from the
HDMI OUT (high-definition multimedia
interface out) jack. When you select [AUTO]
(default), the system outputs video signals of the
highest resolution acceptable for your TV.
If the picture is not clear, natural or to your
satisfaction, try another option that suits the disc
and your TV/projector, etc. For details, refer
also to the instruction manual supplied with the
TV/projector, etc.
[AUTO]
Normally, select this.
[1920
×
1080i*]
Sends 1920 × 1080i video signals.
[1280
×
720p*]
Sends 1280 × 720p video signals.
×
[720
480p*]
Sends 720 × 480p video signals.
* i: interlace, p: progressive
** Depending on the country, [720 × 480/576p] may
appear.
Note
• Even when a setting other than [AUTO] is selected
and the connected TV cannot accept the resolution,
the system automatically adjusts the video signals
that are suitable for the TV.
• When the HDMI indicator on the front panel lights
up, images from the S VIDEO OUT jack is enlarged
vertically. (Except when [720 × 480p] is selected.)
x [YC
C
/RGB (HDMI)]
B
R
Selects the type of HDMI signal output from
HDMI OUT jack.
[YC
C
]
B
R
[RGB]
Note
• If the playback picture becomes distorted, set
[YC
C
] to [RGB].
B
R
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
x [COLOR SYSTEM (VIDEO CD)] (Asian,
Australian, and Middle Eastern models
only)
Select the color system when you play a VIDEO
CD.
[AUTO]
[PAL]
[NTSC]
Note
• You cannot change the color system of the disc itself.
• You can change the color system of the system
according to the connected TV (page 15).
x [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
**
or when you play back a Super Audio CD, CD,
DATA CD (MP3 audio), or DATA DVD for more
than 15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press any button (e.g., H
button) to cancel the screen saver.
[ON]
[OFF]
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a Super
Audio CD, CD, DATA CD (MP3 audio), or
DATA DVD.
Outputs YC
C
signals.
B
R
Outputs RGB signals.
C
].
B
R
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select [AUTO].
Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
Turns on the screen saver.
Turns off the screen saver.
continued
73
GB
Advertisement
Table of Contents
