Amp Block - Sony HT-XT100 Service Manual

HT-XT100
2-4.

AMP BLOCK

7 Remove wires
from the hook.
hook
6 FFC 16P/MAIN-BT
(FFC1) (XP17)
5 connector
(XP4)
8
POWER board hook
MAIN board
4 FFC 16P/MAIN-FRONT (FFC2)
(XP15)
– Rear bottom view –
9 two screws
(3 8 B2)
qa AMP block
8 two screws
(3.5 12 B)
How to install the connector
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK
Insert straight into Insert only part way.
the interior.
connector
connector
connector
3 connector
(XP6)
2 connector
(XP5)
1 connector
(XP7)
The lower side is
the terminal side.
0 Remove the AMP block
in the direction of the arrow.
NG NG
Insert at a slant.
connector
connector connector
How to install the flexible flat cable
When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
NG
Insert at a slant.
flexible flat
cable
colored line
connector