Bottom Panel; Bt Nfc Board - Sony HT-XT100 Service Manual

Note: Follow the disassembly procedure in the numerical order given.
2-2.

BOTTOM PANEL

3 bottom panel
1 two screws
2-3.

BT NFC BOARD

Note: When replacing the BT NFC board or the NFC module, be sure
replace both at the same time.
The BT NFC board or the NFC module cannot replace with single.
3 Peel off the adhesive sheet.
4 BT NFC board
(3 8 B2)
2 screw
(3 8 B2)
1 FFC 16P/MAIN-BT (FFC1)
(XP18)
– Rear bottom view –
2 seven screws
(3.5 12 B)
– Rear bottom view –
terminal side
HT-XT100
How to install the flexible flat cable
When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
NG
Insert at a slant.
flexible flat
cable
colored line
connector
7