Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: (44) 113 387 7133
Fax: (44) 113 387 7125
To help us assist you, please be prepared to provide the following information:
• the MODEL NUMBER of the product (PETL37905.1)
• the NAME of the product (PROFORM 370 P treadmill)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST and the EXPLODED DRAW-
ING in the centre of this manual)
Part No. 230160 R1005A
Printed in Canada © 2005 ICON IP, Inc.
Model No. PETL37905.1
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com
Advertisement
Related Manuals for Pro-Form 370P PETL37905.1
Summary of Contents for Pro-Form 370P PETL37905.1
- Page 1 ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Model No. PETL37905.1 Unit 4, Revie Road Industrial Estate Serial No. Revie Road USER’S MANUAL Beeston Leeds, LS118JG Tel:...
-
Page 2: Table Of Contents
CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the tread- WARNING: mill until your heart rate is near the lowest number in Before beginning this your training zone. or any exercise program, consult your physi- cian. This is especially important for individu- For maximum fat burning, adjust the speed and incline als over the age of 35 or individuals with pre- of the treadmill until your heart rate is near the middle... -
Page 3: Important Precautions
Locate the Reed Switch (10) and the Magnet (18) on IMPORTANT PRECAUTIONS the left side of the Pulley (17). Turn the Pulley until the 3 mm Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed WARNING: Switch is about 3 mm (1/8 in.). -
Page 4: Troubleshooting
TROUBLESHOOTING 20. When folding or moving the treadmill, make maintenance and adjustment procedures de- sure that the storage latch is fully closed. scribed in this manual. Never remove the motor hood unless instructed to do so by an Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and 21. -
Page 5: Before You Begin
HOW TO MOVE THE TREADMILL BEFORE YOU BEGIN Before moving the treadmill, convert the treadmill to the storage position as described on page 15. Make sure that the frame is Thank you for selecting the new PROFORM ® 370 P reading this manual, please see the front cover of this securely held by the storage latch. -
Page 6: Assembly
If the speed or incline setting is too high or too low at Follow your progress with the five displays. ASSEMBLY any time during the program, you can manually override the setting by pressing the Speed or Incline buttons. See to step 5 on page 12. Every few times a Speed button is pressed, an addi- Assembly requires two persons. - Page 7 ting are programmed for each segment. Note: The 2. Identify the Right Handrail (72), which has a large hole in HOW TO USE A PRESET PROGRAM same speed setting and/or incline setting may be the left side. Feed the Upright Wire (42) into the hole in programmed for two or more consecutive seg- the bottom of the Right Handrail and out of the large hole Insert the key into the console.
- Page 8 Speed display—This 4. Hold the Console Base (47) near the Left Handrail (71). moved from the console, and the displays and in- display shows the speed dicators on the console will automatically light in a Attach the ends of the ground wires on the Console Base to the indicated small hole in the Left Handrail with the of the walking belt.
- Page 9 HOW TO TURN ON THE POWER To stop the walking belt, press the Stop button. 7. Press the Upright Wire (42) into the slot in the underside of the Console Base (47) in the indicated area. Cover the The Time/Incline display will begin to flash. To Upright Wire with the Right Grip Plate (36).
-
Page 10: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed. -
Page 11: Ordering Replacement Parts
PART LIST—Model No. PETL37905.1 R1005A REMOVE THIS EXPLODED DRAWING AND PART LIST FROM THE MANUAL No. Qty. Description No. Qty. Description No. Qty. Description Save this EXPLODED DRAWING and PART LIST for future reference. Hood Small Bolt Belt Guide 3/4” Screw Upright Wire Belt Guide Screw Motor Belt... - Page 12 EXPLODED DRAWING—Model No. PETL37905.1 R1005A...
Need help?
Do you have a question about the 370P PETL37905.1 and is the answer not in the manual?
Questions and answers