Module Jig; Product Code; View Of Mjs-46 - Nokia NHM-7 series Service Manual

PAMS Technical Documentation
MJS–46 Module Jig
The MJS–46 Module Jig is used for testing of UI/system/RF–module*.

Product Code

MJS–46 Module Jig:
View of MJS–46
*Note: The nominal supply voltage for MJS–46 is +8.0 V.
The supply voltage must not exceed +12.0 V (min 5V).
(MJS–46 has overvoltage protection).
For flashing with FPS–8, it is possible to bypass the regulator
(jumper).
Issue 1 10/2001
E Nokia Corporation
NHM–7
Service Tools
0770316
Page 5