Transceiver Nhm-7; Introduction; Electrical Modules - Nokia NHM-7 series Service Manual

NHM–7
System Module & UI
Transceiver NHM–7

Introduction

The NHM–7 is a dual band radio transceiver unit for the E–GSM900 and
GSM1800 networks. GSM power class is 4 and GSM1800 power class is
1. It is a true 3 V transceiver, with an internal antenna and vibra.
The NHM–7 phone includes integrated FM radio. Radio is used as a nor-
mal mono receiver. FM radio is highly integrated. Only few external com-
ponents are needed. Headset is used as an antenna for radio.
The transceiver has a full graphic display and the user interface is based
on a Jack style UI with two soft keys.
An internal antenna is used, there is no connection to an external anten-
na.
The transceiver has a low leakage tolerant earpiece and an omnidirec-
tional microphone, providing an excellent audio quality. The transceiver
supports a full rate, an enhanced full rate and a half rate speech decod-
ing.
An integrated IR link provides a connection between two NHM–7 trans-
ceivers or a transceiver and a PC (internal data), or a transceiver and a
printer.
The small SIM ( Subscriber Identity Module ) card is located under the
battery. SIM interface supports both 1.8V and 3V SIM cards.

Electrical Modules

The radio module consists of Radio Frequency (RF) and baseband (BB).
User Interface (UI) contains display, keyboard, IR link, vibra, HF/HS con-
nector and audio parts. UI is divided into radio PWB LA5 and UI PWB
LK5. FM radio is located on the main PWB.
The electrical part of the keyboard is located in separate UI PWB named
LK5. LK5 is connected to radio PWB through spring connectors.
The System blocks provide the MCU, DSP, external memory interface
and digital control functions in UPP ASIC (Universal Phone Processor).
Power supply circuitry, charging, audio processing and RF control hard-
ware are in UEM ASIC (Universal Energy Management).
The purpose of the RF block is to receive and demodulate the radio fre-
quency signal from the base station and to transmit a modulated RF sig-
nal to the base station.
Page 6
E Nokia Corporation
PAMS Technical Documentation
Issue 1 10/2001