Operation - Technibel CAFP 124 RCAFP 164 RCAFP 184 RCAFP 254 RCAFP 364 R Instruction Manual

01_Technibel-PACi_EN.fm Page 22 Thursday, December 9, 2004 11:36 AM
STEP 5
22

Operation

• To warm up the system, the power mains must be turned on at least five
NOTE
(5) hours before operation.
STEP 1 To start the air conditioner
Press the operation button (ON/OFF button).
STEP 2 Setting the mode
Press the MODE button to select the mode of your choice.
[
STEP 3 Setting the fan speed
Press the FAN SPEED selector button to select the fan
speed of your choice.
[
If AUTO is selected, the fan speed switches automatically.
STEP 4 Setting the temperature
Use the
temperature setting as desired.
(
temperature.)
* The temperature cannot be set during FAN mode operation.
STEP 5 Setting the airflow direction
When more than one indoor unit is connected, the UNIT
button is used first to select a unit. Then use the FLAP button
to set the airflow direction to a specific angle or to sweep.
STEP 6 To stop the air conditioner
Press the operation button (ON/OFF button) again.
(AUTO), (HEAT), (DRY),
(AUTO), (HI.), (MED.) or
or button as appropriate to change the
reduces the temperature, and
STEP 1, 6
STEP 2
STEP 3
STEP 4
(COOL) or (FAN)]
(LO.)]
increases the
OI-722-22-EG