Janus GN-100 User Manual

Hide thumbs

Table Of Contents

USER'S MANUAL

Rev 1.2

Table of Contents

Need help?

Do you have a question about the GN-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Janus GN-100

Page 1 USER’S MANUAL Rev 1.2...
Page 2 Before you use Thank you for purchasing Classic Limited. This manual explains how to Install and use the device. Please read the information below before using the device to avoid the discomfort in using the device. Notice  Please understand there might be some error in describing and editing this manual. ...
Page 3: Table Of Contents
Contents  Caution for the safety 5. Installing the product  Caution to Micro SD the card 6. Description of Product usage 1. About Product 7. Install the viewer program in PC 2. Configuration of product 8. Menu 3. Name of each part 9.
Page 4: Caution For The Safety
Caution for the safety   3 to 5 minutes or more after the first time, or insert the SD Do not operate the device during driving for the safe driving. memory format create a file system check and SD memory recording begins.
Page 5: Caution To Micro Sd The Card
Caution to Micro SD card The Micro SD Card is a consumable item. Its read/write characteristics have a lifetime. The recording, prolonged use may not be periodic management is required a. Please prepare for a spare Micro SD card against the case when SD card defectiveness happens. b.
Page 6: About Product
About Product  Clear video quality of 1M pixel  Support HD 720P  SD card Auto recovery function  Voice guide- to inform the condition of the device  Wi-Fi for connecting with a smart phone  High bright security LED ...
Page 7: Configuration Of Product
Configuration of the product The configuration of this device is subject to change without prior notice to improve the product performance...
Page 8: Name Of Each Part
Name of Each part...
Page 9: Specification
Specification GN100 Image sensor High resolution 1M CMOS Sensor Audio Input Built-in Mic Video compression H.264 Audio compression ADPCM Recording resolution 720P(1280*720) / 450P(800*450) Recording Speed Max 30fps Emergency button Event record by the emergency button G-Sensor Event record by the external impact Voice guide(speaker) Alarm and voce to inform the condition of the device External GPS(Optional)
Page 10: Installing The Product
Installing the product...
Page 11 Caution about how to use the Micro SD card  Do not use the Micro SD card of this device for other purpose. It is to be automatically removed in this device.  Due to the Micro SD card compatibility, please purchase the genuine. ...
Page 12: Description Of Product Usage
Description of Product Use After installing powering on this device, all LEDs start flickering. Recording starts with “Recording starts” voice guide and powering on REC Power ON LED. In disconnecting with an external GPS, GPS LED Powers off. Power OFF When the device is disconnected with the power, REC LED powers off.
Page 13 [Record mode] Once powering on the device, the normal recording starts. Normal Security LED flickering every 1 second. If some impact is applied to the moment of car accident, the built-in sensor detects it and make the device recording “Impact” event model with flickering REC LED. Impact After the end of the event record mode, the normal recording automatically restarts.
Page 14 [Description of voice guide] Description Voice guide Normally start recoding Start recording The system is finished The system is to be shut down. Overwrite Recording does not have enough available space. Please check overwriting setting. Connected with an external GPS GPS connected.
Page 15 Defective Micro SD card Memory card is damaged and cannot be recorded. Recover Micro SD card’s file Reboot because of the damaged memory card. Please replace the memory card if this occurrence system continues. Change settings Setting changed and reboot. Protect the car battery, shut down The system is to be shut down to protect the battery.
Page 16: Install The Viewer Program In Pc
Installing the viewer program in PC Caution Over CPU-Dual 2.4G, Over RAM-2G and Over VGA512M as PC specification are required for playing back the HD. In the low spec PC, the recorded data cannot be properly played back. 1. New Micro SD card is not contained with the viewer software. 2.
Page 17 9. If the internet is connected, “The latest version confirmation” window about the firmware and viewer program pops up. If you want to upgrade them, please click ”Upgrade”. If the network is not connected, viewer program runs. 10. When the installation is completed, GN100 viewer program automatically runs and Classic Limited viewer program icon is to be created on PC.
Page 18 11. Open a file- when you click “Open” in the viewer, please choose one removal Disk then click “confirm”...
Page 19: Menu
7. Menu Icon of basic menu Reverse/Play thumb nail file Pause Draw a lanes Repeat a event Print 1 frame playback Back-up next event Setting menu Play back speed Open a file Adjust the audio Switching screen, Black white screen volume Speed (only case that an external...
Page 20 ① Setting a. System  Resolution HD(720P)  Normal / Event: Adjust the recording frame per second.  Brightness: Adjust the brightness in recording. There are 3 levels, Dark/Normal /Bright. Above items are related with the data size and SD memory storage space.
Page 21 b. Event  Event: IMPACT / PARKING / MOTION  Event Recording Time Post-Alarm: Set the time for recording the data by set FPS after the event.  IMPACT: Applying G-Sensor’s sensitivity.  PARKING: When there is no movement for 5minutes, switch to PARKING mode, reduce the recording frames to 5frame per second in order to reduce recording storage.
Page 22 c. User settings  Vehicle Info: Input information of the vehicle.  Deriver info: Input the driver’s name.  License plate No: Input the license plate number of the vehicle.  User info: User ID: Input ID in the main screen.(Default: admin). Password: Set the password to log in.(Default : No password) ...
Page 23 d. Removable Disk Sometimes errors occur on the SD card. This function is for restoring or formatting the data of a SD card. Before doing this, please back up the recorded data on the SD card because formatting will delete all data. Select the drive where the SD card is installed.
Page 24 e. Version  Version OS: Show the information about OS. S/W VER: Show the information about software version. VIEWER: Show the information about viewer version.  The latest firmware/viewer – Click “Checking the latest version” to check update version of the firmware and the viewer software. Caution ...
Page 25 Functions a. Image (JPEG, BMP), AVI Backup, JDR backup, GSENSOR backup. b. Image backup file can be shown in an image viewer or “Paint” for Windows OS. c. AVI file can be played in Windows Media Player or other AV player.
Page 26 g. Double click the left mouse button on the video screen to convert to full screen from the main screen. To return to Full screen the main screen, click the left mouse button again. h. On the playback screen, click the right mouse button on a screen position to make the zoom.
Page 27 i. Click the Draw a lane icon as above pop up screen, adjust the line to match the lane. Select “Draw a lane” on the load and click Apply button to start. j. To cancel “Draw a lane”, unselect Draw lane on the load Draw a and click “Apply”...
Page 28 n. Click Repeat event icon as above to setup repeat section. Click the desired Start point and End point during Shuffle playback, playback repeat between the selected times. playback Click Release to clear Start and End point. Repeat event is possible in one event. In playing back the data, time, date and speed shows up in the bottom left of the video screen.
Page 29 o. Folder in the SD card  Only after powering off, please remove the SD card.  Please insert the SD card in PC.  Please select the removable disk in the explorer menu.  Folders in the removable disk are displayed like the left picture. “event”...
Page 30: How To Upgrade
How to upgrade the firmware  How to manually upgrade the firmware ① Please disconnect the power with the device. ② Please remove SD card from the device and insert it into PC. Then please copy and paste the downloaded firmware file to the “update” folder in SD card. ③...
Page 31  How to upgrade the firmware with smart phone a. Before begin, please register car dvr. (Refer to page 36) b. Run ‘Geeview’ application and select the registered car dvr, it will automatically check the firmware version and ask you to update firmware if there is newest firmware.
Page 32: Connection With A Smart Phone
Connected with a smart phone ① Wi-Fi connection a. Press “Wi-Fi” button to turn on Wi-Fi. b. “Wi-Fi connected” voice guide comes up. c. The standby time of Wi-Fi connection is about 5 minutes. If there is no connection, it will automatically disconnect after 5 minutes.
Page 33 ② How to use Smart Phone application with Wi-Fi ③ 2-1) Janus-Android application a. Please install “Janus” from ‘Google Play store’. b. Click “Janus” icon to start the application.
Page 34 Janus application always keeps landscape mode. When you execute “Janus ” app at the first time, the information window pops up to lead you directly to the registering menu as there is no registered Car DVR. Select “No” to finish the app, Select “Yes” to move “Searching Car DVR”...
Page 35 5. Image, SSID and model number of the searched car DVRs are displayed. The device with the good reception is to be placed in the top of the list. 6. Select the car DVR to be registered. When you research for a car DVR, please press “Search”...
Page 36 9. Click the registered device, the linked scene comes out like the left picture. 10. When you click the setting menu, the setting items shows up like the left picture. If you want to change the setting value, please click your desired item to change.
Page 37 11. When you press “Save” button after changing the setting value, the device is to reboot. 12. If you softly touch on real time video screen after accessing, the menu list shows up. 13. If you click icon, playing back menu comes up. 14.
Page 38 2-2)Janus-iOS application a. Please install “Janus” from ‘Apple app store’. b. First, please execute Wi-Fi of car dvr with short pressing the emergency button. c. Go to WiFi setup on iPhone setting, select WiFi of CAR DVR(“janus_bb_xxxxxx) d. Enter password of car dvr WiFi, default password is “qwertyuiop”.
Page 39  You will have live screen when you successfully login.  Click button to switch front and rear camera.  Pinch and stretch screen to zoom in and out.(Same to Search mode)  Click button to go back to main menu. ...
Page 40  Click button to enter Settings mode from main menu.  Select the item you want to setup.  When you change settings and exit the menu, car dvr will reboot automatically to apply new settings. Caution During playing the video on Wi-Fi, the device does not record the video/audio data in the SD card for the product’s stability. When you stop the paying the video on Wi-Fi, the device automatically start the recording.
Page 41 ① Backup(Android) a. Move to the record data to be backed up. b. Click button in the bottom of the right side. c. In completing the backup, you are to move to the path to be displayed in the pop-up information window. (storage/sdcard0/DCIM/geeview)
Page 42 ② Backup(iOS) a. Move to the record data to be backed up. b. Click button in the bottom of the right side. c. Choose one among the photo image and the video clip.
Page 43 Caution for using Wi-Fi 1. Check before connecting a smart - Press the button and check the voice guide “Wi-Fi connected”. phone. - Please check the Wi-Fi strength or setting of the smart phone. a. In advanced Wi-Fi settings, in case of “On” status, please try to re-access by 2.

Janus GN-100 User Manual

Table of Contents

Need help?

Questions and answers

Related Manuals for Janus GN-100

Summary of Contents for Janus GN-100

Table of Contents