Brother TD-4000 User Manual page 34

31
STEP 3 Reference
Problem
When printing via the USB
cable, the printer repeatedly
pauses and then continues
printing.
An error occurred because the
roll could not be fed to the
beginning of the label.
• Is the printer set for sequential printing?
®
For Windows XP:
If so, set print mode to buffered printing. (Open the printer
properties from [Control Panel] - [Printer and other hardware] -
[Printer and Faxes] and click [Printing Preferences...] button in
the [General] tab. Choose the option "After one page of data is
received".)
®
For Windows Vista :
If so, set print mode to buffered printing. (Open printer properties
from [Control Panel] - [Hardware and Sound] - [Printers] and click
[Printing Preferences...] button in the [General] tab. Choose the
option "After one page of data is received".)
®
For Windows 7:
If so, set print mode to buffered printing. (Open printer properties
from - [Devices and Printers], right-clicking the printer whose
settings are to be changed, and selecting [Printing preferences].
Choose the option "After one page of data is received".)
• An alternative solution is to disconnect the LAN cable until USB
printing is completed.
• The procedure for feeding to the beginning of the label is
different for die-cut labels and continuous length label. See
"Setting the RD Roll" on page 12.
• When using die-cut labels with a length of 152 mm or more, an
error may occur if the TD-4000/4100N cannot detect the
beginning of the label after the first time that the roll is fed. To
clear the error, press the Feed button again.
Solution