CNET CWR-935M User Manual page 83

Item
Fragment Threshold
RTS Threshold
Beacon Interval
Preamble Type
IAPP
Protection
Aggregation
Short GI
RF Output Power
Apply Changes
Reset
To identify the maxima length of packet, the over length packet will be
fragmentized. The allowed range is 256-2346, and default length is 2346
This value should remain at its default setting of 2347. The range is 0~2347.
Should you encounter inconsistent data flow, only minor modifications are
recommended. If a network packet is smaller than the present RTS threshold
size, the RTS/CTS mechanism will not be enabled. The router sends
Request to Send (RTS) frames to a particular receiving station and
negotiates the sending of a data frame. After receiving an RTS, the wireless
station responds with a Clear to Send (CTS) frame to acknowledge the right
to begin transmission. Fill the range from 0 to 2347 into this blank.
Beacons are packets sent by an access point to synchronize a wireless
network. Specify a beacon interval value. The allowed setting range is
20-1024 ms.
PLCP is Physical layer convergence protocol and PPDU is PLCP protocol
data unit during transmission, the PSDU shall be appended to a PLCP
preamble and header to create the PPDU. It has 2 options: Long Preamble
and Short Preamble.
Inter-Access Point Protocol is a recommendation that describes an optional
extension to IEEE
communications among multivendor systems.
Please select to enable wireless protection or not.
Enable this function will combine several packets to one and transmit it. It
can reduce the problem when mass packets are transmitting.
Users can get better wireless transmission efficiency when they enable this
function.
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and 15%.
& Click on Apply Changes to save the setting data. Or you may click on Reset
to clear all the input data.
Description
802.11 that provides
83
wireless access-point