Epson L455 User Manual page 24

User's Guide
4. Slide the edge guide to the edge of the paper, and then close the feeder guard.
5. Check the current paper size and paper type settings displayed on the control panel. To use the settings, select
Do Not Change using the
select Change using the
Important:
c
The paper setup screen is not displayed if the paper is not loaded along the right side of the rear paper feed. An
error occurs when you start printing.
Note:
If you have disabled the Paper Configuration setting, the paper setting screen is not displayed. Go to step 7.
6. On the paper size setting screen, select the paper size using the
On the paper type setting screen, select the paper type in the same way, and then press the OK button.
Confirm the settings, and then press the OK button.
Note:
You can also display the paper size and paper type settings screen by selecting Setup > Printer Setup > Paper Source
Settings > Paper Setup.
7. Slide out the output tray and then raise the stopper.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Loading Paper
u d
or button, press the OK button, and then go to step 7. To change the settings,
u d
or button, press the OK button, and then go to the next step.
l r
or button, and then press the OK button.
24