Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher IKTS 35 Instruction Manual

NOTE!
If you wish to turn off one hob while the device is in use, press and hold the
button of the desired hob until all settings return to "0" and the power and
temperature control lights flash.
The selected hob will be in standby mode.
To turn off the entire device, press the ON/OFF button

After cooking or heating is finished, remove the plug from its socket and remove all
cookware from the hobs!

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device regularly.
o For easier cleaning of the induction plate, remove it from its recess in the serving trolley.
o Clean the hobs and their casing with a soft, moist cloth and mild, non-abrasive
cleaning agent.
o Remove all dirt and dust from the ventilation openings and clean if necessary with a
brush or air stream.
o Never clean the device using substances containing petrol or any other solvent, in
order to avoid damage to the device's surface.
o Clean the serving trolley and insertion plate with a soft cloth and mild cleaning agent
o Use only a soft cloth and never use any granulated cleaning substances that may
damage the device's surface.
o After cleaning, use a soft, dry cloth to dry and polish the surface of the device.
.
- 37 -