Epson PowerLite 470 Installation Handbook
Maintenance
Hide thumbs
Also See for PowerLite 470:
- User manual (210 pages) ,
- Operation manual (50 pages) ,
- Specifications (6 pages)
Advertisement
Table of Contents
Epson PowerLite 470 / 475W / 480 / 485W
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted on the wall or ceiling.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to
the side in case the lamp is broken.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
4. Slide off the lamp cover.
INSTALLATION HANDBOOK
Maintenance
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Epson PowerLite 470
Summary of Contents for Epson PowerLite 470
- Page 1 INSTALLATION HANDBOOK Epson PowerLite 470 / 475W / 480 / 485W Maintenance Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury.
- Page 2 INSTALLATION HANDBOOK Epson PowerLite 470 / 475W / 480 / 485W Maintenance 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 6. Lift up the lamp handle and gently pull the lamp out of the projector.
- Page 3 INSTALLATION HANDBOOK Epson PowerLite 470 / 475W / 480 / 485W Maintenance 7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure it is facing the right way. Press the handle down.
- Page 4 INSTALLATION HANDBOOK Epson PowerLite 470 / 475W / 480 / 485W Maintenance 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Need help?
Do you have a question about the PowerLite 470 and is the answer not in the manual?
Questions and answers