Prime & Rinse - Keurig KOLD Starting Manual

Is it time to prime?
No, still Yes, it's ready
to prime!
chilling.
prime & rinse
Before you begin enjoying your beverages,
the system must be primed and rinsed after the
initial 2 hour chilling.
1. Fill Water reservoir with room temperature or cooler water.
2. Insert the Prime & care pod.
The KOLD™ button will blink purple.
3. Place glass on drip tray. Press KOLD™ button to start cycle.
In about a minute, 8 oz. of rinse water will be dispensed.
Dispose of liquid.
4. Once complete, remove Prime & care pod and save
for future cleansing.
The KOLD™ button will be lit blue when cycle completes.
Visit Keurig.com/KOLD for more information and instructional videos. 7