Section 3 Disassembly Instructions - Icom IC-F14 Service Manual

SECTION 3
•
REMOVING THE CHASSIS UNIT
1 Unscrew 1 nut A, and remove 2 knobs B, c.
2 Unscrew 2 screws D.
3 Take off the chassis unit in the direction of the arrow.
4 Unplug the connector E from the chassis unit.
A
E
*B
C
*: IC-F14/F15 only
•
REMOVING THE MAIN UNIT (IC-F14/F15)
1 Unscrew 2 nuts F, and remove the top plate G.
2 Unsolder 5 points H, and remove the shield cover.
3 Unscrew 2 screws I, and remove the side plate J.
4 Unscrew 7 screws K.
5 Unsolder 4 points L, and take off the main unit in the
direction of the arrow.
H
L
K
L
Main unit
G
F
Chassis unit
DISASSEMBLY INSTRUCTIONS
Chassis unit
D
Shield cover
H
I
J
K
K
•
REMOVING THE MAIN UNIT (IC-F14S/F15S)
1 Remove the switch connector M.
2 Unscrew 2 nuts F, and remove the top plate G.
3 Unsolder 5 points H, and remove the shield cover.
4 Unscrew 2 screws I, and remove the side plate J.
5 Unscrew 7 screws K.
6 Unsolder 4 points L, and take off the main unit in the
direction of the arrow.
H
K
L
Main unit
G
F
a
Chassis unit
3 - 1
Shield cover
H
I
M
a
L
J
K
K