Icom IC-F14 Service Manual page 14

5-2 CONFIGULATION LIST FOR ADJUSTMENTS
- IC-F14/F15 -
CHANNEL FREQUENCY
1 174.000 MHz
2 174.000 MHz
3 174.000 MHz
4 174.000 MHz
5 174.000 MHz
- IC-F14S/F15S -
• Clone adjustment freqency and setting condition everytime adjusting each item (1-8).
1.PLL LOCK VOLTAGE
CH. FREQUENCY
1 174.000 MHz
2 136.000 MHz
2.REFERENCE FREQENCY
CH. FREQUENCY
1 174.000 MHz
3.TX POWER
CH. FREQUENCY
1 174.000 MHz
2 174.000 MHz
3 174.000 MHz
4.FM DEVIATION
CH. FREQUENCY
1 155.000 MHz
2 155.000 MHz Set IF bandwidth to Wide/Middle.
SETTING CONDITION
Set TX power to High.
Set TX power to Low2.
Set TX power to Low1.
Set TX power to Low1.
Set DTCS code to 007.
Set IF bandwidth to Narrow.
Set TX power to Low1.
Set DTCS code to 007.
Set IF bandwidth to Wide/Middle.
(Middle : EUR only)
SETTING CONDITION
Set TX power to Low1.
Set IF bandwidth to Wide.
SETTING CONDITION
Set TX power to Low1.
SETTING CONDITION
Set TX power to High.
Set TX power to Low2.
Set TX power to Low1.
SETTING CONDITION
Set TX power to Low1.
Set IF bandwidth to Narrow.
Set TX power to Low1.
(Middle : EUR only)
CHANNEL FREQUENCY
6 155.000 MHz
7 155.000 MHz
8 155.000MHz
9 136.000 MHz
5.MODULATION BALANCE
CH. FREQUENCY
1 174.000 MHz
2 174.000 MHz
6.CTCSS/DTCS DEVIATION
CH. FREQUENCY
1 155.000MHz
7.RX SENSITIVITY
CH. FREQUENCY
1 136.000 MHz
8.SQUELCH LEVEL
CH. FREQUENCY
1 155.000MHz
5 - 2 2
SETTING CONDITION
Set TX power to Low1.
Set IF bandwidth to Narrow.
Set TX power to Low1.
Set IF bandwidth to Wide/Middle.
(Middle : EUR only)
Set TX power to Low1.
Set IF bandwidth to Wide.
Set CTCSS to151.400Hz.
Set IF bandwidth to Wide.
SETTING CONDITION
Set TX power to Low1.
Set DTCS code to 007.
Set IF bandwidth to Narrow .
Set TX power to Low1.
Set DTCS code to 007.
Set IF bandwidth to Wide/Middle .
(Middle : EUR only)
SETTING CONDITION
Set TX power to Low1.
Set IF bandwidth to Wide.
Set CTCSS to 151.400Hz.
SETTING CONDITION
Set IF bandwidth to Wide .
SETTING CONDITION
Set TX power to Low1.
Set IF bandwidth to Wide.