Panasonic NA-16VX1 Service Manual page 35

Description
21 Replacement
of the thermistor-4
22 Replacement
of the heater unit
23 Replacement
of the belt
Figure
(TH4 detects water temperature in the drum)
After lay down the washing machine on it left side
and remove the hole cover,
1.Remove the two screws mounting the thermistor-4.
Note:
Please spread a cloth to prevent scratch on the body.
2.Remove one connector from the thermistor-4.
3.Pull out the thermistor-4.
After remove the rear panel
1.Remove the cover and the two connectors.
2.Remove one nut mounting the heater unit by the
box wrench (size 10mm) and remove a earthwire.
3.Release another nut slightly, and push the nut
inside by the box wrench, and pull it out to remove.
1.Remove all screws mounting the rear panel.
2.Remove the rear panel.
-35-
NA-16VX1/16VG1/14VA1
Procedure