Panasonic NA-16VX1 Service Manual page 29

Description
7 Replacement of
the door unit
8 Replacement of
the body band A
Figure
5.Remove the one lead wire holder from the PC
Board.
6.Turn the PC Board up, remove the five screws
and the seven pawls mounting the PC Board,
and remove the PC Board cover.
Note:
Please spread a cloth on to the washine machine
to prevent scratch on the surface of the panel face
board.
7.Remove the two connectors from the PC Board
for power side. (See page-25 replacement of
the PC Board for power side)
8.Remove the PC Board for operation.
Note:
Connector of the PC Board for operation shall be
inserted to the main PC Board(for power side).
1.After opening the door unit, remove the three
screws mounting the door unit.
2.Hold and pull the door unit upward to remove.
1.After remove the door unit, remove the seven
seals covering the screw of the Body band A with
mini-screwdriver.
-29-
NA-16VX1/16VG1/14VA1
Procedure