Pegasus CCTV PNDVR User Manual page 61

Please note that pressing numerical button 16 deletes the entries from BEGIN, END
and MODE section.
Enter the time for the regular business hours,
10am through 8pm, and then select MODE 1.
Please note that the END time is entered as
19:59. The time must be entered in 24 hour
format and must end one minute before the
actual end time as the DVR will record for one
full minute starting at 19:59.
Enter the first part of the non-business hours,
8pm through 11:59pm, and then select MODE 2.
The DVR does not recognize beyond the actual
24 hour (00:00 ~ 23:59) cycle. Hence the
overnight schedule must be divided into two
parts.
Enter the second part of the non-business
hours, midnight through 9:59am, and then select
the same mode. Press the ENTER button to
save and exit to the CHART screen.
The CHART will display the schedule for all
days of the week, MODE 1 recording from 10am
through 8pm and MODE 2 recording from 8pm
through 10am.
60
MPEG-4 DVR