Pegasus CCTV PNDVR User Manual page 37

13.2 IRIS CONTROL
Button
Iris Open; TIME SEARCH on remote controller
Iris Close; EXT. SEARCH on remote controller
Auto Iris; LOG on remote controller
13.3 PRESET & TOUR
Button
Set preset position; SPOT OUT on remote controller
Move the PTZ into desired location.
1.
Press the Preset button.
2.
User 1 will illuminate.
3.
Set the # for the Preset location.
4.
Press Enter to save and exit.
5.
Go to preset position; INFO on remote controller
Press Go to button.
1.
Enter the desired Preset # and press Enter.
2.
Start Auto Tour; BACKUP on remote controller
Press Auto Tour Button.
1.
Press the + button and enter the range of Preset and press Enter.
2.
For Example, Auto Tour Button, +5 will start the tour of 1 ~ 5 presets
3.
of the PTZ Camera
13.4 CUSTOM FUNCTIONS
Button
PTZ custom function 1; DISPLAY on remote controller
PTZ custom function 2; ZOOM on remote controller
PTZ custom function 3; P/T/Z on remote controller
3.5 AUTO PAN / AUTO TILT / PATTERN / POWER
Button
Auto Pan; STOP on remote controller
(Supported on certain European PTZ Camera)
Auto Tilt; REW on remote controller
(Supported on certain European PTZ Camera)
Run Pattern
Power On/Off; FF on remote controller
(Supported on certain European PTZ Camera)
Function
Function
Function
Function
36
MPEG-4 DVR