Pegasus CCTV PNDVR User Manual page 43

14.4.2 MOTION RECORDING & ALARM RECORDING
For instances where a location needs to be recorded whenever motion detection
occurs and also needs to be recorded in case of an alarm triggers. Both motion and
alarm recording can be used to satisfy the requirement.
The combination of both settings will allow the DVR to record only when there is a
motion detection or alarm trigger. At both instances, the DVR will record at 30
pictures per second for all channels.
Motion recording has been activated under
RECORD menu. The recording rate for motion
is at 30 pictures per second.
ALARM recording has been configured to record
at 30 pictures per second. Please verify that the
USE for the camera necessary has been set to
ON.
42
MPEG-4 DVR