Table of Contents
Advertisement
14.4.4 SCHEDULE MOTION RECORDING & ALARM RECORDING
For instances where a location needs to be recorded using only motion recording at
a predetermined schedule, but also needs to record in case of alarm triggers. Both
schedule motion recording and alarm recording can be used in conjunction to meet
the requirement.
The combination of both settings will allow the DVR to record whenever there is a
motion detection during the scheduled time period, but will record any time in case of
an alarm trigger. At both instances, the DVR will record at 30 pictures per second for
all channels.
14.4.5 SUMMARY OF COMBINATION
The following is the summary of possible combinations of recording modes.
RECORD MODE
Normal
Motion
Alarm
Schedule
Schedule Motion
Normal and Alarm
Motion and Alarm
Schedule and Alarm
Schedule Motion and Alarm ALARM & SCHEDULE
Any of the MODES within the schedule can be
configured to be run during the scheduled
recording time period. The illustration to the left
has modified MODE1 to record at 30 pictures
per second. Please verify that the USE for the
camera necessary has been set to ON, and that
MOTION has been set to ON.
ALARM recording has been configured to record
at 30 pictures per second. Please verify that the
USE for the camera necessary has been set to
ON.
MENU
RECORD
RECORD
ALARM
SCHEDULE
SCHEDULE
RECORD & ALARM
RECORD & ALARM
ALARM & SCHEDULE
44
RECORD
ALARM
CAMERA USE
CAMERA USE
ON
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
ON
OFF
ON
SCHEDULE
MOTION
CAMERA USE
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
MPEG-4 DVR
Advertisement
Table of Contents
