Table of Contents
Advertisement
The remote control
Insert the battery
Push the catch in the direction shown by
arrow
When the battery (CR2025) has run out, replace
it with a new one. (The battery lasts about one
year, depending on the frequency of use.) If the
remote control unit fails to work even when it
is operated near the camera-recorder's remote
control sensor, the battery has run out.
Remote control setup
When using two camera-recorders simultaneously,
set this camera-recorder and the remote control to
either "operation mode 1" or "operation mode 2"
so the remote control does not operate the wrong
camera-recorder by mistake.
Setting
Wireless remote control
Press the operation buttons STOP ( ) and STILL
) at the same time to set the remote
ADV (
control unit for use in "operation mode 1".
Alternatively, press the STOP ( ) and STILL ADV
(
) buttons at the same time to set the remote
control unit for use in "operation mode 2".
When the battery in the remote control unit is
replaced, the remote control unit is set for use in
"operation mode 1".
In the setup menus, OTHER FUNCTIONS
screen, REMOTE, set to 1 or 2. (Page 148 of Vol. 2)
If different settings are used for the camera-
recorder and remote control unit, "REMOTE" lights
Operation
mode 2
Operation
mode 1
Advertisement
Table of Contents
