Table of Contents
Advertisement
Precaution for use
When shooting important events (such as weddings), always take some trial shots and check that the
sound and images have been recorded properly before actual shooting.
These settings affect the control and playback sequence of the recorded contents. Before making a
recording, set and check the calendar and time zone. (Page E-25)
Please understand that Panasonic cannot provide compensation for images and/or sound not recorded
because of problems with the camera-recorder or P2 card.
Respect copyrights
Video and audio you have recorded with this camera-recorder is for your own personal enjoyment. In
accordance with the copyright laws, it may not be used for other purposes without permission from the
copyright holder.
Caution regarding laser beams
The MOS sensor may suffer damage if the lens is subjected to light from a laser beam.
When using the camera-recorder in locations where laser irradiation equipment is used, be careful not to
allow the laser beam to shine directly on the lens.
Before connecting, turn off the main unit power, and check the shape and orientation of the terminal.
(Page 103 of Vol. 2)
Media that can be used in this unit
The following media can be used in this unit. For details, refer to the respective pages.
P2 card (Page 14 of Vol. 2, Page 158 of Vol. 2)
SD/SDHC memory cards (Page 16 of Vol. 2, Page 159 of Vol. 2)
There are tripod mounting holes that are compatible with 1/4-20UNC and 3/8-16UNC screws. Use the
The tripod mounting hole is 5.5 mm deep. Do not force the tripod screw beyond this depth.
For other usage notes, see (Page E-11).
Attach the tripod to the tripod hole on the bottom.
Advertisement
Table of Contents
