Tv Controls - Mitsubishi Electric C10 SERIES Owner's Manual

6
1. Setup and Operation

TV Controls

Re mote Control
Sleep Timer. Turns off the TV after the length
of time you set. Press SLEEP repeatedly to
increase the time from 15 minutes up to the
maximum of 90 minutes. To cancel the timer,
press SLEEP again to highlight Off.
Number/letter keys
Channel tuning, page 8
PIN entry, page 24
Adds a separator in digital channel
numbers. Clears some menu entries.
Mutes the TV speakers.
MUTE
VOL / Controls volume of TV speakers.
CH / Changes channels
Navigation and adjustment
controls
ENTER
Press to confirm a selection.
INFO
TV status, page 12
Note
The following keys are not used in this model:
TOOLS GUIDE
If You Power Off the TV by Mistake
If the status indicator is green and blinking
rapidly, (about 60 seconds after you shut off
power), wait a few moments for the status indi-
cator to stop blinking and press POWER to turn
the TV on again.
For assistance call 1(800) 332-2119
Emitter End
LAST Returns to the previous channel.
FORMAT
FREEZE
INPUT
VIDEO EXIT
Selects a Clears all menus.
Picture Mode,
page 20
Powers TV on or off.
Displays up to nine favorite
FAV
channels, page 10 .
Changes picture shape,
page 9
Freezes a broadcast TV
picture.
Press to select a TV input.
See "TV Inputs" page 8 .
AUDIO
Digital Source: Switches
between language tracks avail-
able for the current program.
To change the default, use the
Sound > Language menu.
Analog Source: Switches
between Mono, Stereo, and
SAP for the current program.
To change the default, use the
Sound > Analog Listen To
menu ( page 21 ).
MENU
Displays or clears the TV main
menu ( page 20 ). Also steps
back one menu.