Locks - Mitsubishi Electric C10 SERIES Owner's Manual

24
3. TV Menus
Channels, continued
Additive Scan
The additive scan adds only new channels. Unlike the
full channel scan, custom channel settings are pre-
served.
1.
Highlight Additive Scan and press ENTER to select
either ON or OFF.
2.
Highlight Scan Channels and press ENTER to start
the additive scan.
Addi ng a Channel
You can manually add a new channel using the Add
Channel menu This menu requires you to enter the RF
channel number. The RF channel number is available
from:
• www.antennaweb.org
• The broadcaster
• Your cable-service provider
Enter the RF channel number using keys on the remote
control.
For assistance call 1(800) 332-2119
L ocks
PIN
You will be prompted to enter a 4-digit personal identifi-
cation number (PIN) when you
• Select Locks on the main menu.
• Try to watch a blocked program
• Tune to a locked channel
Enter your PIN to temporarily unlock the TV and watch
the blocked program or channel. Power the TV off and
then back on to re-activate channel locks.
Ratings Lock
Rating locks restricts access using ratings sent by
broadcasters. There are separate rating systems for
movies and television programs. The TV comes from
the factory with the rating locks turned off. You must
turn on blocking to activate rating restrictions.
TV Ratings
Highlight the rating level you wish to change and press
ENTER to block/unblock.
Apply supplemental content blocking to the age-based
ratings by using the TV content categories FV, D, L, S, V.
TV Ratings
menu