Tv Inputs; Picture Settings; Using An External Sound System - Mitsubishi Electric C10 SERIES Owner's Manual

8
1. Setup and Operation
TV I nputs
Selecting an Input to Watch
Press the INPUT key to select a TV input to watch. Use
the Setup > Input menu to rename, add, or remove
inputs from the list.
Naming
Assign helpful names to TV inputs.
1.
Press MENU.
2.
Go to the Setup > Input > Input Name menu.
3.
In the inputs list, highlight the input to change and
press ENTER.
4.
Highlight a name in the name list.
5.
Press ENTER to confirm
the name.
6.
Press EXIT to clear
menus.
Removing
To remove unused inputs from the input list,
1.
Switch to an input other than the one you are
removing.
2.
Go to the name list for the input as described
above.
3.
Highlight Skip this input and press ENTER.
4.
Press EXIT to clear menus.
For assistance call 1(800) 332-2119
Tun ing Channels from the Antenna Input
After performing a channel scan, use these methods to
tune to channels on the ANT input. Channels can be
either from an over-the-air antenna or from direct cable
service.
• Enter the channel number using the number keys
on the remote control and press ENTER.
• Include the sub-channel when tuning digital chan-
nels. For a two-part digital channel, such as 3-1,
—
press 3 CANCEL 1 ENTER.
• Press CH / to change channels one channel
at a time.
• Press and hold CH
nels.
• Press LAST to return to the previous channel.
• Use the Fav (Favorites) feature to tune to up to nine
favorite channels. See page 10 .

Picture Settings

1.
To get the best picture under dif-
ferent viewing conditions, set the
Picture Mode first before changing
other video settings. See page 20 .
a. Press VIDEO multiple times to select
one of these Picture Modes:
Name When to Use
Brilliant Under bright light
Bright For most daytime viewing
Natural For most nighttime viewing
Game With gaming consoles
b. Press ENTER to confirm your selection.
2.
Wait a few seconds for
Additional picture options are available in the Picture
menu, page 20 .

Using an External Sound System

To switch from the internal TV speakers to an external
sound system:
1.
Press MENU.
2.
Display the Sound > TV Speaker option.
3.
Press ENTER to switch between ON and OFF..
Additional audio controls are in the Sound menu, page
21 .
/ to speed through chan-
the display to clear.