Mitsubishi Electric Untitle LDT37Iv User Manual page 13

To reduce the risk of "image persistence", please adjust the
following items based on the application being used.
"SCREEN SAVER" (See page 24), "SIDE BORDER
COLOR"(See page 24), "DATE & TIME" (See page 27),
"SCHEDULE"(See page 27).
11. Installing and removing stand
How to install stand
1. Please turn monitor off.
2. After inserting stand in guide block, fasten M6 x 16
screws on both sides of the monitor.
How to remove the stand
1. Spread the protective sheet on the flat surface, such as
a desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
safe place for reuse.
screws
stands
English-11
12. To prevent the main power switch
from being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE: With the main power switch cover in place, the main
power switch can not be turned off. Remove main
power switch cover in order to switch off the display.
Screw
Main switch cover