Log System - Digiever DS-2009 User Manual

(3) Configuration page timeout period ( on remote configuration page)
NVR allows users to freely set up the idle time to automatically log out NVR.
Default is 600 seconds.
(4) Auto logout and login (on local display configuration page)
Auto logout and login feature is an advanced firewall to prevent outsiders
getting confidential videos and manipulating NVR settings.
Auto logout is especially designed for administrator and power user who may
carelessly forget to logout NVR.
Auto login will automatically log in by a non-admin nor power user.
Note: Please create a user account first.
Please enable auto logout feature, set on which page(s) and idle time period to
active auto logout. Enable auto login feature, set time period to active auto
login after NVR log out to login page. Then, please click "Apply" button.
5.6.2

Log System

Please select "Log System" from the drop-down menu of Management to begin.
If the hard disk is not installed, the following window will pop up when you click "Log
System."
209