Table of Contents
Advertisement
Timer Recording
When you program both the D-VHS (digital) and VHS (analog) timer recording
When you turn the VCR off, the programmed recording light will appear on the front
panel display, showing that the VCR is in stand-by mode for the VHS timer
recording. In this mode, the D-VHS timer recording you have set may not be
recorded depending on the integrated HDTV or IEEE 1394-equipped HDTV
receiver that you are using (Refer to your TV or receiver owner's guide for the
details.). To cancel the standby mode, press POWER on the VCR front panel
once. When you press POWER, the programmed recording light will be turned off
and the VCR power will remain off. Please note that the VCR cannot activate the
VHS timer recording while the programmed recording light is turned off.
When the D-VHS timer recording is over, press POWER on the front panel twice to
turn on the programmed recording light.
VHS (analog) Timer Recording of Digital Broad-
cast
Be sure to connect the VCR and an integrated HDTV or an IEEE 1394-
equipped HDTV receiver with a video and audio cable to record a digital
broadcast in VHS format.
1
Select the channel you would like to record on an integrated HDTV or an IEEE
1394-equipped HDTV receiver, not on the VCR.
2
Load a tape with its erasure prevention tab intact into the VCR.
3
Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
If there is at least one programmed recording already entered, you will see the
Recap screen. Wait 4 seconds and the VCR Plus+ system menu will appear.
If you have already programmed 8 recording events, Program memory is full
will appear on your screen for 3 seconds, and then the Recap screen will
appear. Use CANCEL to erase an entry before you can add another one.
4
VCR Plus+ system menu appears. See page 33 to learn how to program with
VCR Plus+ system. To pass this screen, press ENTER.
5
Program to record menu appears. Channel will flash. Press the ADJUST
buttons to choose the channel you would like to record. Press ENTER.
• Select External L1 if you connect an integrated HDTV or an IEEE 1394-
equipped HDTV receiver to the rear panel.
• Select External L2 if you connect an integrated HDTV or an IEEE 1394-
equipped HDTV receiver to the front panel.
IMPORTANT
IMPORTANT
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
CH DAY
ON
OFF
§
10 TH14
9:00pm 10:30pm SP
--- --
--:--
--:--
--- --
--:--
--:--
--- --
--:--
--:--
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
Recap screen
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to program.
Press MENU to go back.
¬Program to record
ƒChannel
External L1
ƒDay
ƒStart time
--:--
ƒStop
time
--:--
ƒRecord speed
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
SP
SP
SP
--
AUTO
29
Hide quick links:
Advertisement
Table of Contents
