Mitsubishi HS-HD1100U Owner's Manual page 10

Hooking Up Your VCR
Connections to Integrated HDTV or IEEE 1394-equipped HDTV Receiver
If you connect the HS-HD1100U to an integrated HDTV
or an IEEE 1394-equipped HDTV receiver with an IEEE
1394 cable, you can record digital broadcasts in D-VHS
format, which records digital broadcasts as digital signals,
so programs can be recorded as is with no loss of quality.
And this connection also makes it possible to playback a
recorded digital signal in D-VHS format.
1 Connect the supplied IEEE 1394 cable to IEEE 1394
INTERFACE on the HS-HD1100U. You can connect
either of the two IEEE 1394 INTERFACE terminals.
Connect the other end of this cable to IEEE 1394
INTERFACE terminal on the TV or the receiver.
When you want to record digital broadcasts in VHS
(analog) format, follow the steps 2 and 3 below.
2 Connect the red and white audio cable to AUDIO IN
R (right) and AUDIO IN L (left) on the VCR. Connect
the other end to the TV or the receiver's AUDIO
OUTPUT RIGHT and AUDIO OUTPUT LEFT. Match
the colors of the connectors to the cables.
VCR Rear Panel
8
AUDIO
Red
IN 1
R
White
L/MONO
Yellow
VIDEO
IN 1
Yellow
IEEE 1394-equipped
HDTV receiver
3 Connect the yellow video cable to VIDEO IN on the
VCR. Connect the other end to VIDEO OUTPUT on
the TV or receiver.
You may need to purchase additional sets of audio
and video cable for this hookup.
Refer to your integrated HDTV or IEEE 1394-
equipped HDTV receiver owner's guide for these
connections.
IEEE 1394
INTERFACE
White
Red
L
R
R
OR
IMPORTANT
supplied
IEEE 1394 cable
integrated HDTV