Denon AVR-X4100W Owner's Manual page 68

Contents Connections
TRIGGER OUT jacks
When a device with TRIGGER IN jack is connected, the connected device's power on/standby can be controlled through linked operation to this unit.
The TRIGGER OUT jack outputs a maximum 12 V DC /150 mA electrical signal.
NOTE
0 Use a monaural mini-plug cable for connecting the TRIGGER OUT jacks. Do not use a stereo mini-plug cable.
0 If the permissible trigger input level for the connected device is larger than 12 V DC/150 mA, or has shorted, the TRIGGER OUT jack cannot be used. In this case, turn off the
power to the unit, and disconnect it.
Front panel Display
Playback
12 V DC/150 mA trigger-compatible device
FRONT FRONT CENTER SURROUND SURROUND
Rear panel 68
Settings Tips
HEIGHT1 HEIGHT1
SURROUND BACK SURROUND BACK
Remote
Appendix
Index