Denon AVR-X4100W Owner's Manual page 222

Contents Connections
o Set the distance
0.0 ft – 60.0 ft / 0.00 m – 18.00 m
0 The speakers that can be selected differ depending on the "Amp Assign" and
"Speaker Config." settings. (v p. 208, 217)
0 Default settings:
Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center /
Subwoofer 1 / Subwoofer 2: 12.0 ft (3.60 m)
Speakers other than the above: 10.0 ft (3.00 m)
0 Set the difference in the distance between the speakers to less than 20.0 ft
(6.00 m).
Front panel Display
Playback Settings
Levels
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
o Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 The set "Levels" are reflected in all sound modes.
0 If you wish to adjust the channel level for each input source, carry out the
settings in "Channel Level Adjust". (v p. 125)
0 When headphones are connected to the PHONES connector on this unit, you
cannot set "Levels".
o Set Defaults
The "Levels" settings are returned to the default settings.
Rear panel 222
Tips
Remote Index
Appendix