Denon AVR-X4100W Owner's Manual page 201

Contents Connections
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Ear Height
Back
Measurement requires several minutes.
0
NOTE
If "Caution!" is displayed on TV screen:
0 Go to "Error messages" (v p. 205). Check any related items, and
perform the necessary procedures.
0 If the volume level for the subwoofer is not appropriate, an error message is
displayed. See "Subwoofer level error message and how to adjust"
(v p. 206).
Front panel Display
Playback
Begin Test
Rear panel 201
Settings
7
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front :Yes
Center :Yes
Subwoofer :Yes
Surround :Yes
Repeat Last Test
Remote
Tips Appendix
Next
Index