Denon AVR-X4100W Owner's Manual page 22

Contents Connections
q w e r t y u
FRONT FRONT CENTER SURROUND
A Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 66)
A Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B Turn clockwise until the antennas is fully connected.
C Rotate the antenna upwards for best reception.
q
FRONT
Front panel Display
Playback
HEIGHT1 HEIGHT1
SURROUND SURROUND BACK SURROUND BACK
w e
HEIGHT1 HEIGHT1
FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK
Rear panel
Settings
B TRIGGER OUT jacks
q
Used to connect devices equipped with the trigger function.
(v p. 68)
C Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
(v p. 53)
D RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
E REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 67)
F Denon Link HD connector
Used to connect a Denon Link HD compatible Blu-ray Disc player.
(v p. 58)
G SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 60)
22 Remote
Tips Appendix
Index