When Inflating Your Tires - Ford Expedition 2006 Owner's Manual

Hide thumbs Also See for Expedition 2006:
Table of Contents

Advertisement

Available languages

Available languages

Low Tire Warning
Light
Solid Warning Light
Flashing Warning Light
(flashes for 20 to 30
seconds either at
start-up or while
driving)

When inflating your tires

When putting air into your tires (such as at a gas station or in your
garage), the Tire Pressure Monitoring System may not respond
immediately to the air added to your tires. Here are the details:
• The tire pressure monitor sensors mounted in your wheels updates
your vehicle with tire pressure information only once every minute,
2006 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Tires, Wheels and Loading
Customer Action Required
1. Check your tire pressure to ensure they are
properly inflated, refer to Inspecting and
inflating your tires in this chapter. Ford
recommends the use of a digital or dial type
tire pressure gauge rather than a stick type
tire pressure gauge for increased accuracy.
2. After inflating your tires to the
manufacturer's recommended air pressure as
shown on the Safety Compliance Certification
Label (located on the driver's door or the
B-Pillar), the vehicle must be driven for at
least two minutes at 20 mph (32 km/h) to
guarantee that the light will turn off.
3. If the light remains on even after these
steps have been taken, have the system
inspected by your authorized dealer.
1. Your spare tire is in use. Repair the
damaged road wheel and re-mount it on the
vehicle to restore system functionality. For a
description of how the system functions under
these conditions, refer to When You Have a
Flat Tire in this section.
2. If your tires are inflated to the
manufacturer's recommended tire pressure,
and your spare tire is not in use, and a
flashing low time warning light is still present,
have the system inspected by your authorized
dealer.
219

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents