To Use The Soft Ap Function; To Connect A Usb Device - LG 32LF580N Owner's Manual

• Invalid settings on network devices (wired / wireless line sharer, hub) can cause the monitor
to run slowly or not operate properly. Install the devices correctly according to the appropriate
manual and set the network.
• Connection method may differ according to the AP manufacturer.
Soft AP

To use the Soft AP function

SMART SETTINGS
This function allows you to change a wired Internet connection to your monitor to Wi-Fi, allowing
you to connect various external devices or to use wireless Internet.
Soft AP Sets to On / Off.
Security Key Sets the Wi-Fi security number.
• You can set the security key with a combination of English letters and
numbers between 8 and 64 characters long.
• The default setting is "LG123456".
• To enable the Soft AP function, your monitor must be turned on and have a wired Internet
connection.
• Up to four external devices can be connected.
• If the Soft AP function is enabled, the Wi-Fi Direct and Miracast
unavailable. You must set the Soft AP function to Off to use the Wi-Fi Direct and Miracast
functions.
USB

To connect a USB device

Connect a USB storage device (external HDD, USB memory) to the USB port of monitor to enjoy the
content files stored in the USB device on your monitor.
To remove a USB storage device, select the Quick Menu
do not remove physically until you see the message that the USB has been removed. If detached
early, an error may occur on the monitor or the USB storage device.
• Once a USB device has been selected for removal, it can no longer be read. Remove the USB
storage device and then re-connect it.
NETWORK Soft AP
TM
functions become
USB Device that you wish to remove;
TM
21