Magic Remote - LG 32LF580N Owner's Manual

To set automatic standby
[This function is available on certain models or in certain countries only.]
SMART SETTINGS
If you do not press any button on the monitor or remote control for a certain period, the monitor
will automatically switch to standby mode.
• This function does not work on Store Demo mode or while software update via network.
Lock
To set password
SMART SETTINGS
Sets or changes monitor password.
• The initial password is set as [0000].
To lock system
SMART SETTINGS
Permits only specific external input.
Select the Lock System to On.
Input Block
Application Lock

Magic remote

* Magic Remote is Separate purchase items.
To register the magic remote
To use the Magic Remote, register it with your monitor first.
Register Magic Remote as follows before use.
1 Turn on the monitor and wait for about 10 seconds and then press Wheel (OK) button while
pointing the remote control at the monitor.
2 The remote control is automatically registered and the registration completion message
appears on the monitor screen.
• If you failed to register the Magic Remote, turn off the monitor and try again.
TIME Automatic Standby
LOCK Set Password
LOCK Lock System
Block the input sources.
Lock the Application.
15