Mitsubishi Electric XL2550U User Manual page 8

Preparating your projector (continued)
Bottom side
Remote control
28
About the laser beam
This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)
Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
Caution:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.
1
2
1
2
3
4
COMPUTER
5
1 2
VIDEO S-VIDEO
DVI-D(HDCP)
6
HOME PageUP AUTO POSITION
7
END PageDOWN LASER
8
9
10
R-CLICK ENTER
MENU
11
KEYSTONE
VOLUME
ASPECT
WALL SCREEN EXPAND PinP
12
CE MUTE STILL
13
1 Adjustment foot (for vertical position)
2 Adjustment foot (for horizontal position)
1 Laser aperture
2 Transmission window
3 Indicator
4 POWER button
5 VIDEO button
6 DVI-D (HDCP) button
7 HOME button
8 END button
9 Mouse pointer
10 MENU button
11 + , - (VOLUME) buttons
12 WALL SCREEN button
13 CE (Color Enhancer) button
14 MUTE button (Audio/Video)
27
15 EXPAND button
26
16 STILL button
25
17 PinP button
24
18 ASPECT button
23
19 KEYSTONE button
20 ENTER button
22
21 R-CLICK button
22 Direction buttons
21
23 LASER button
24 AUTO POSITION button
20
25 PageUP and PageDOWN buttons
19
26 S-VIDEO button
18
27 COMPUTER 1, 2 buttons
17
28 L-CLICK button
16
• The + and - buttons are used in the KEYSTONE
15
adjustment and the EXPAND mode in addition to
the volume control.
• The direction buttons are used for the keystone
14
adjustment and fi ne adjustment (
only).
• Pressing the LASER button emits a laser beam.
Even when you keep holding down the LASER but-
ton, it is emitted only one minute. To keep emitting
it longer, press the LASER button again.
• You can disable the LASER button to prevent laser
radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
button 3 times.
How to enable the LASER button
While holding the LASER button down, press the
button 3 times.
• Whenever the batteries are replaced, the LASER
button is enabled.
EN-8
and buttons