2. Withdraw bulb holder from
reflector by turning anticlockwise.
3. Push bulb into holder slightly,
rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Fog lights
Have bulbs replaced by a workshop.
Tail lights
1. Remove the three retaining
screws.
2. Remove light housing from
vehicle.
3. Disengage connector plug from
bulb holder.
Vehicle care
4. Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal
from light housing.
6. Push bulb into socket slightly,
rotate anticlockwise, remove and
renew bulb.
143