Mitsubishi Electric XD1000 User Manual page 21

Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
How to change the settings:
With the remote control:
1. Press the ASPECT button.
• Every time the ASPECT button is pressed, the aspect mode changes from AUTO to 16:9, to REAL, and back to
AUTO.
• When the keystone adjustment is applied, the REAL mode can not be selected.
With the FEATURE menu:
(See page 22 for menu setting.)
1. Display the FEATURE menu.
2. Select ASPECT by pressing the
3. Select your desired aspect ratio by pressing the
When 16:9 is selected:
4. Press the ENTER button.
5. Select your desired position by pressing the
To cancel the menu:
6. Press the MENU button.
Important :
• When a 16:9 image is kept displayed for a long time before displaying 4:3 image, the afterimages of the black bars
may appear on the 4:3 image screen. Consult your dealer in this case.
or button.
or button.
or button.
opt.
XGA60
FEATURE
ASPECT AUTO
EN-21