For all Units
New Unit: Truck
Delivery
New Unit: From a
Dealer
Factory Delivery
Receiving Your Unit
1. Receiving Your Unit
You should inspect the grinder immediately after you receive delivery.
See the "Machine Component Identification" section of this
manual for a diagram of the grinder and its components.
If you have missing or damaged components, please contact NorthStar
Product Support at 1-800-270-0810.
Depending on your unit and model, it may have been shipped on a
wooden skid, cardboard container or other appropriate method.
If any assembly is required. Separate assembly instructions will be
included.
Your unit should have been delivered completely assembled and ready to
run. Read the "Pre-Start Checklist & Procedures" section, and verify that
the unit has been properly "prepped" before initial use.
In these cases, your unit has been completely assembled, tested and pre-
run. It should be ready for usage. See "Pre-Start Checklist and
Procedures".
7