Trigger And Flash - Philips Dica 220 Hardware Manual

2.2

TRIGGER AND FLASH

The Dica 220 has one optically isolated trigger input and
two optically isolated flash outputs. See chapter 6 for the
electrical details.
The trigger input enables the feature that an image capture
is started by a hardware signal (the trigger input).
The flash outputs can control an external flash unit if
required.
The trigger and flash connector at the backside of the
Dica 220 is a Hirose connector, type: HR10A-7R-6SB.
The counterpart (cable part) must be: HR10A-7P-6P.
Also check our website for available accessories that can
be used to connect the camera to your system.
3
2
1
Figure 2-3 Dica 220 Trigger/Flash connector
2005-06-27
Pin
1
2
3
4
5
6
Dica 220 Trigger/Flash internals:
Dica
4
Dica
5
6
Function
Trigger Ground
Trigger input
Flash 1 output
Flash 2 output
NC
Flash 24V
15V
940E
2) Trigger input
1) Trigger Ground
6) Flash 24V
400E
3) Flash 1 output
400E
4) Flash 2 output
Page 3